10MM DIA ZAPC 10MM 22MM FL .020TA

10,0 4FL 0,50R TX Z-CARB ZAP 10x10x22x72

Sold in packs of 1
SGS

SGS 46858

$87.58 Price:
$45.55

10.00mm Dia, 22.00mm LOC, 10.00mm Shank Dia, 0.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
10,0 ENDMILL 4FL 1,00R TX Z-CARB ZAP 10X10X12X100

10,0 4FL 1,00R TX Z-CARB ZAP 10x10x12x100

Sold in packs of 1
SGS

SGS 46824

$98.41 Price:
$51.18

10.00mm Dia, 12.00mm LOC, 40.01mm Reach, 10.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
10MM DIA ZAPC 10MM 22MM FL .040TA

10,0 4FL 1,00R TX Z-CARB ZAP 10x10x22x72

Sold in packs of 1
SGS

SGS 46859

$87.58 Price:
$45.55

10.00mm Dia, 22.00mm LOC, 10.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
10,0 ENDMILL 4FL 2,00R TX Z-CARB ZAP 10X10X12X100

10,0 4FL 2,00R TX Z-CARB ZAP 10x10x12x100

Sold in packs of 1
SGS

SGS 46825

$98.41 Price:
$51.18

10.00mm Dia, 12.00mm LOC, 40.01mm Reach, 10.00mm Shank Dia, 2.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
10,0 ENDMILL 4FL 2,00R TX Z-CARB ZAP 10x10x22x72

10,0 4FL 2,00R TX Z-CARB ZAP 10x10x22x72

Sold in packs of 1
SGS

SGS 46890

$87.40 Price:
$45.45

10.00mm Dia, 22.00mm LOC, 10.00mm Shank Dia, 2.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
12MM DIA ZAPC 12MM 26MM FL .020TA

12,0 4FL 0,50R TX Z-CARB ZAP 12x12x26x83

Sold in packs of 1
SGS

SGS 46860

$142.11 Price:
$73.90

12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 0.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
12MM DIA ZAPC 12MM 26MM FL .030TA

12,0 4FL 0,75R TX Z-CARB ZAP 12x12x26x83

Sold in packs of 1
SGS

SGS 46861

$142.11 Price:
$73.90

12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 0.75mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
12,0 ENDMILL 4FL 1,00R TX Z-CARB ZAP 12X12X15X100

12,0 4FL 1,00R TX Z-CARB ZAP 12x12x15x100

Sold in packs of 1
SGS

SGS 46826

$188.46 Price:
$97.99

12.00mm Dia, 15.00mm LOC, 48.01mm Reach, 12.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
12MM DIA ZAPC 12MM 26MM FL 1,0TX

12,0 4FL 1,00R TX Z-CARB ZAP 12x12x26x83

Sold in packs of 1
SGS

SGS 46893

$142.11 Price:
$73.90

12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
12,0 ENDMILL 4FL 2,00R TX Z-CARB ZAP 12X12X15X100

12,0 4FL 2,00R TX Z-CARB ZAP 12x12x15x100

Sold in packs of 1
SGS

SGS 46828

$188.34 Price:
$97.93

12.00mm Dia, 15.00mm LOC, 48.01mm Reach, 12.00mm Shank Dia, 2.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
12,0 ENDMILL 4FL 2,00R TX Z-CARB ZAP 12x12x26x83

12,0 4FL 2,00R TX Z-CARB ZAP 12x12x26x83

Sold in packs of 1
SGS

SGS 46895

$142.11 Price:
$73.90

12.00mm Dia, 26.00mm LOC, 12.00mm Shank Dia, 2.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
12,0 ENDMILL 4FL 3,00R TX Z-CARB ZAP 12X12X15X100

12,0 4FL 3,00R TX Z-CARB ZAP 12x12x15x100

Sold in packs of 1
SGS

SGS 46829

$188.34 Price:
$97.93

12.00mm Dia, 15.00mm LOC, 48.01mm Reach, 12.00mm Shank Dia, 3.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
14MM DIA SER ZAP 14MM JETSTREAM 1,0R

14,0 4FL 1,00R TX JET Z-CARB ZAP 14x14x26x83

Sold in packs of 1
SGS

SGS 46494

$290.66 Price:
$151.14

14.00mm Dia, 26.00mm LOC, 14.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
14MM DIA ZAPC 14MM 26MM FL .040TA

14,0 4FL 1,00R TX Z-CARB ZAP 14x14x26x83

Sold in packs of 1
SGS

SGS 46862

$247.07 Price:
$128.48

14.00mm Dia, 26.00mm LOC, 14.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
16MM DIA SER ZAP 16MM JETSTREAM 1,0R

16,0 4FL 1,00R TX JET Z-CARB ZAP 16x16x32x92

Sold in packs of 1
SGS

SGS 46495

$320.23 Price:
$166.52

16.00mm Dia, 32.00mm LOC, 16.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
16MM DIA ZAPC 16MM 32MM FL .040TA

16,0 4FL 1,00R TX Z-CARB ZAP 16x16x32x92

Sold in packs of 1
SGS

SGS 46863

$267.43 Price:
$139.07

16.00mm Dia, 32.00mm LOC, 16.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
16,0 ENDMILL 4FL 2,00R TX Z-CARB ZAP 16X16X20X115

16,0 4FL 2,00R TX Z-CARB ZAP 16x16x20x115

Sold in packs of 1
SGS

SGS 46832

$348.17 Price:
$181.05

16.00mm Dia, 20.00mm LOC, 65.00mm Reach, 16.00mm Shank Dia, 2.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
16,0 ENDMILL 4FL 3,00R TX Z-CARB ZAP 16X16X20X115

16,0 4FL 3,00R TX Z-CARB ZAP 16x16x20x115

Sold in packs of 1
SGS

SGS 46833

$346.50 Price:
$180.19

16.00mm Dia, 20.00mm LOC, 65.00mm Reach, 16.00mm Shank Dia, 3.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
16MM DIA ZAPC 16MM 32MM FL .118TA

16,0 4FL 3,00R TX Z-CARB ZAP 16x16x32x92

Sold in packs of 1
SGS

SGS 46864

$267.43 Price:
$139.07

16.00mm Dia, 32.00mm LOC, 16.00mm Shank Dia, 3.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
2,5 ENDMILL 4FL 0,20R TX Z-CARB ZAP 2,5x6x7x57

2,5 4FL 0,20R TX Z-CARB ZAP 2,5x6x7x57

Sold in packs of 1
SGS

SGS 46874

$52.10 Price:
$27.07

2.50mm Dia, 7.00mm LOC, 6.00mm Shank Dia, 0.20mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
20MM DIA SER ZAP 20MM JETSTREAM 1,0R

20,0 4FL 1,00R TX JET Z-CARB ZAP 20x20x38x104

Sold in packs of 1
SGS

SGS 46497

$527.86 Price:
$274.48

20.00mm Dia, 38.00mm LOC, 20.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
20MM DIA ZAPC 20MM 38MM FL .040TA

20,0 4FL 1,00R TX Z-CARB ZAP 20x20x38x104

Sold in packs of 1
SGS

SGS 46865

$491.53 Price:
$255.59

20.00mm Dia, 38.00mm LOC, 20.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
20,0 ENDMILL 4FL 3,00R TX Z-CARB ZAP

20,0 4FL 3,00R TX Z-CARB ZAP 20x20x38x104

Sold in packs of 1
SGS

SGS 42722

$488.85 Price:
$254.20

20.00mm Dia, 38.00mm LOC, 20.00mm Shank Dia, 3.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
25MM DIA SER ZAP 25MM JETSTREAM 1,0R

25,0 4FL 1,00R TX JET Z-CARB ZAP 25x25x38x104

Sold in packs of 1
SGS

SGS 46498

$668.90 Price:
$347.82

25.00mm Dia, 38.00mm LOC, 25.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
25MM DIA ZAPC 25MM 38MM FL .040TA

25,0 4FL 1,00R TX Z-CARB ZAP 25x25x38x104

Sold in packs of 1
SGS

SGS 46866

$637.98 Price:
$331.75

25.00mm Dia, 38.00mm LOC, 25.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
03MM DIA ZAPC 3MM 8MM FL .015TA

3,0 4FL 0,30R TX Z-CARB ZAP 3x6x8x57

Sold in packs of 1
SGS

SGS 46851

$52.14 Price:
$27.11

3.00mm Dia, 8.00mm LOC, 6.00mm Shank Dia, 0.30mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
04MM DIA ZAPC 4MM 11MM FL .015TA

4,0 4FL 0,30R TX Z-CARB ZAP 4x6x11x57

Sold in packs of 1
SGS

SGS 46852

$52.17 Price:
$27.12

4.00mm Dia, 11.00mm LOC, 6.00mm Shank Dia, 0.30mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
4,0 ENDMILL 4FL 0,50R TA Z-CARB ZAP 4X6X11X57

4,0 4FL 0,50R TX Z-CARB ZAP 4x6x11x57

Sold in packs of 1
SGS

SGS 46881

$52.17 Price:
$27.12

4.00mm Dia, 11.00mm LOC, 6.00mm Shank Dia, 0.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
05MM DIA ZAPC 5MM 13MM FL .015TA

5,0 4FL 0,30R TX Z-CARB ZAP 5x6x13x57

Sold in packs of 1
SGS

SGS 46853

$52.13 Price:
$27.11

5.00mm Dia, 13.00mm LOC, 6.00mm Shank Dia, 0.30mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
6,0 ENDMILL 4FL 0,25R TA Z-CARB ZAP 6X6X13X57

6,0 4FL 0,25R TX Z-CARB ZAP 6x6x13x57

Sold in packs of 1
SGS

SGS 46882

$51.10 Price:
$26.58

6.00mm Dia, 13.00mm LOC, 6.00mm Shank Dia, 0.25mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
06MM DIA ZAPC 6MM 13MM FL .020TA

6,0 4FL 0,50R TX Z-CARB ZAP 6x6x13x57

Sold in packs of 1
SGS

SGS 46854

$51.10 Price:
$26.58

6.00mm Dia, 13.00mm LOC, 6.00mm Shank Dia, 0.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
6,0 ENDMILL 4FL 0,50R TX Z-CARB ZAP 6X6X8X75

6,0 4FL 0,50R TX Z-CARB ZAP 6x6x8x75

Sold in packs of 1
SGS

SGS 46821

$61.22 Price:
$31.83

6.00mm Dia, 8.00mm LOC, 24.00mm Reach, 6.00mm Shank Dia, 0.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
06MM DIA ZAPC 6MM 13MM FL .040TA

6,0 4FL 1,00R TX Z-CARB ZAP 6x6x13x57

Sold in packs of 1
SGS

SGS 46855

$51.10 Price:
$26.58

6.00mm Dia, 13.00mm LOC, 6.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
6,0 ENDMILL 4FL 1,50R TX Z-CARB ZAP 6x6x13x57

6,0 4FL 1,50R TX Z-CARB ZAP 6x6x13x57

Sold in packs of 1
SGS

SGS 46884

$51.10 Price:
$26.58

6.00mm Dia, 13.00mm LOC, 6.00mm Shank Dia, 1.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
08MM DIA ZAPC 8MM 19MM FL .020TA

8,0 4FL 0,50R TX Z-CARB ZAP 8x8x19x63

Sold in packs of 1
SGS

SGS 46856

$70.81 Price:
$36.81

8.00mm Dia, 19.00mm LOC, 8.00mm Shank Dia, 0.50mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
8,0 ENDMILL 4FL 1,00R TX Z-CARB ZAP 8X8X10X75

8,0 4FL 1,00R TX Z-CARB ZAP 8x8x10x75

Sold in packs of 1
SGS

SGS 46822

$89.84 Price:
$46.72

8.00mm Dia, 10.00mm LOC, 32.00mm Reach, 8.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
08MM DIA ZAPC 8MM 19MM FL .040TA

8,0 4FL 1,00R TX Z-CARB ZAP 8x8x19x63

Sold in packs of 1
SGS

SGS 46857

$70.81 Price:
$36.81

8.00mm Dia, 19.00mm LOC, 8.00mm Shank Dia, 1.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO
8,0 ENDMILL 4FL 2,00R TX Z-CARB ZAP 8X8X10X75

8,0 4FL 2,00R TX Z-CARB ZAP 8x8x10x75

Sold in packs of 1
SGS

SGS 46823

$89.67 Price:
$46.62

8.00mm Dia, 10.00mm LOC, 32.00mm Reach, 8.00mm Shank Dia, 2.00mm Radius, 4 Flute, 35-38 Degree Helix, Ti-NAMITE-X (TX) Coated, Series ZPMC, Z-Carb-AP, Corner Radius End Mill
USUALLY SHIPS SAME DAY OUT OF OHIO