Carbi-Universal Grades
Manufacturer: CARBI-UNIVERSAL
Grade name: PHZ
Insert material: CARBIDE - PVD COATED
ISO range:
(chart)
P15-35 M15-35 K15-35 S25-30
ANSI range: C5-C6 C1-C2
Coating: PURPLE HAZE TiAlN-F
Description: 'Universal application PVD 'Purple Haze'-coated micrograin carbide grade for general purpose machining on all workpiece materials. New grade designed specifically for the job shop industry where a wide range of workpiece materials is employed. An ideal general machining grade providing excellent performance when machining most steels, stainless steels, cast irons, and superalloys under stable to moderately interrupted conditions. Keen micro-geometry edgeline makes PHZ superior for turning sticky and work hardening materials, plus provides all-round smoother cutting action with lower power consumption. Excellent resistance to built-up edge and plastic deformation, and also effective when machining hardened and short-chipping materials. With its tough micrograin cobalt-enriched substrate, PHZ performs very effectively in medium machining to roughing operations, and is capable of wet or dry turning.'

 

Manufacturer: CARBI-UNIVERSAL
Grade name: PHT
Insert material: CARBIDE - PVD COATED
ISO range:
(chart)
P15-35 M15-35 K15-35 N15-35 S25-30
ANSI range: C5-C6 C1-C2
Coating: PURPLE HAZE TiAlN-F
Description: 'Universal application micrograin PVD 'Purple Haze'-coated carbide grade for general threading and grooving operations on all workpiece materials. Also demonstrates superb performance on light to medium boring and profiliing applications. New grade designed specifically for the job shop industry where a wide range of workpiece materials is employed. Advanced PVD coating over a tough and highly wear resistant carbide substrate. This grade provides the toughness needed to handle the demands of grooving, threading and cut-off operations. Performs extremely well when machining most steels, stainless steels, cast irons, non-ferrous materials, and superalloys under stable to moderately interrupted conditions. Also can be effectively applied when machining hardened and short-chipping materials. PHT is capable of wet or dry machining.'

 

Manufacturer: CARBI-UNIVERSAL
Grade name: UVF
Insert material: CARBIDE - PVD COATED
ISO range:
(chart)
P05-25 M10-25 K10-25 N20-30 S10-25 H20
ANSI range: C6-C7 C3-C4
Coating: PVD-F (Physical Vapor Deposition - Fusion)
Description: 'Hard, wear resistant universal application PVD-coated micrograin carbide grade for finishing to light roughing on all workpiece materials. New grade designed specifically for the job shop industry where a wide range of workpiece materials is employed. An ideal finishing grade providing excellent performance when machining most steels, stainless steels, cast irons, non-ferrous materials, and superalloys under stable conditions. Keen micro-geometry edgeline gives UVF superior tool life in sticky and work hardening materials, plus provides all-round smoother cutting action with lower power consumption. Excellent resistance to built-up edge and plastic deformation. Top performance at high speeds, with moderate feeds, on stable setups. Also effective when machining hardened and short-chipping materials. UVF is capable of wet or dry turning.'

 

Manufacturer: CARBI-UNIVERSAL
Grade name: UVM
Insert material: CARBIDE - PVD COATED
ISO range:
(chart)
P15-35 M15-35 K15-35 S25-30
ANSI range: C5-C6 C1-C2
Coating: PVD-F (Physical Vapor Deposition - Fusion)
Description: 'Universal application PVD-coated micrograin carbide grade for general purpose milling on all workpiece materials. New grade designed specifically for the job shop industry where a wide range of workpiece materials is employed. Performs extremely well in the most difficult to machine materials, including stainless steels, high temp alloys and hardened components. Keen micro-geometry edgeline makes UVM superior for milling sticky and work hardening materials. Excellent resistance to built-up edge. Top performance with moderate to high speeds, combined with high feeds, on stable setups. UVM is capable of wet or dry milling.'