Mitsubishi Grades |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | AP20M |
Insert material: | CARBIDE - PVD COATED |
ISO range: | P30 |
ANSI range: | C5 |
Coating: | TiAlN |
Description: | 'A new insert grade which is composed of a strong C5 substrate with high toughness and AP coating, TiAlN, which demonstrates high thermal shock resistance resulting in prolonged tool life.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | AP25N |
Insert material: | CERMET - PVD COATED |
ISO range: | P05-15 |
ANSI range: | C7 |
Coating: | Multi-coated TiALN |
Description: | 'A multi-coated, true micrograin cermet for turning applications. This all new cermet exhibits extreme toughness while maintaining the relative hardness consistent with conventional cermets. The unique coating is Mitsubishi Carbide's own TiALN based system.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | F5010 |
Insert material: | CARBIDE - CVD COATED |
ISO range: | K05-20 |
ANSI range: | C2-C3 |
Coating: | Multi-layer |
Description: | 'An all new multi-coated milling grade for cast irons. This highly wear resistant grade provides both the wear and thermal shock resistance required in today's wet or dry machining of cast irons at higher cutting speeds.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | F620 |
Insert material: | CARBIDE - CVD COATED |
ISO range: | P05-25 |
ANSI range: | C6-C7 |
Coating: | CVD |
Description: | 'Coated cemented carbide recommended for the milling of a wide variety of steels and stainless steels. Tough substrate and added wear resistance characterize this ideal milling grade.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | F7010 |
Insert material: | CARBIDE - CVD COATED |
ISO range: | |
ANSI range: | |
Coating: | Multi-layer |
Description: | 'A multi-coated cemented higher speed carbide milling grade for stainless steels, exotics and alloy steels. This new grade provides high wear, cratering and thermal shock resistance. Designed for the most difficult milling operations.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | HTi10 |
Insert material: | CARBIDE - UNCOATED |
ISO range: | K10 |
ANSI range: | C3 |
Coating: | |
Description: | 'Uncoated carbide grade for general purpose turning or milling of aluminum, cast iron, and all non-ferrous materials. Balanced strength and wear resistance characteristics make HTi10 an outstanding grade.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | HTi20T |
Insert material: | CARBIDE - UNCOATED |
ISO range: | K20-25 |
ANSI range: | C1-C2 |
Coating: | |
Description: | 'Uncoated carbide grade. Suitable for rough machining of nickel base alloys and cast iron.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | NX2525 |
Insert material: | CERMET |
ISO range: | P01-15 K01-15 |
ANSI range: | C7-C8 C3-C4 |
Coating: | |
Description: | 'This new innovation in cermet technology provides the best in toughness and high wear resistance. This cermet is outstanding in milling, showing both reliability and increased tool life run at higher surface speeds in steels and cast irons.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | NX4545 |
Insert material: | CERMET |
ISO range: | P15-35 M15-35 |
ANSI range: | C5-C6 |
Coating: | |
Description: | Machining for a variety of materials. Workpieces with welded surfaces, scale and materials such as carbon, alloy and stainless steel can be reliably machined. Feed can be doubled compared to uncoated carbide. Excellent surface finishes. |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | NX55 |
Insert material: | CERMET |
ISO range: | P05-15 |
ANSI range: | C7 |
Coating: | |
Description: | 'Titanium carbonitride (Cermet) composition for turning and milling steel. Good balance of wear resistance and toughness. NX55 can be selected for steel cutting operations.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | U610 |
Insert material: | CARBIDE - CVD COATED |
ISO range: | P05-20 |
ANSI range: | C6-C7 |
Coating: | Multi-layer |
Description: | 'Coated cemented carbide recommended for the medium to high speed turning of steels and cast irons. Very good resistance to wear.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | U625 |
Insert material: | CARBIDE - CVD COATED |
ISO range: | |
ANSI range: | |
Coating: | Multi-layer |
Description: | 'Coated cemented carbide recommended for medium speed cutting of all steels where the toughness of the cutting edge is important.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | UC5005 |
Insert material: | CARBIDE - CVD COATED |
ISO range: | K01-05 |
ANSI range: | C4 |
Coating: | TiCN |
Description: | 'Combination of special micro-grain cemented carbide substrate, which excels in wear and thermal shock resistance, and tough, thick TiCN, which actualizes long tool life and high efficiency in all cast iron turning such as gray cast iron and ductile cast iron.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | UC6010 |
Insert material: | CARBIDE - CVD COATED |
ISO range: | P05-20 K10-20 |
ANSI range: | C6-C7 C2-C3 |
Coating: | Multi-layer |
Description: | 'Latest technology in coated cemented carbide. Recommended for the high speed cutting of both steels and cast irons. Extraordinary resistance to plastic deformation, cratering and flank wear. Excellent toughness in relation to wear resistance.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | UC6025 |
Insert material: | CARBIDE - CVD COATED |
ISO range: | P20-30 |
ANSI range: | C6 |
Coating: | Multi-layer |
Description: | 'Latest technology in coated cemented carbide. Recommended for the medium speed cutting of all steels when cutting edge toughness is a priority and interrupted cutting and difficult machining conditions exist. Dependable edge security ' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | UE6005 |
Insert material: | CARBIDE - CVD COATED |
ISO range: | P01-10 K01-10 |
ANSI range: | C7-C8 C3-C4 |
Coating: | Multi-layer |
Description: | 'Ultra new technology in coated cemented carbide. Recommended for high speed turning of all cast irons and alloy steels above 28 HRc. Superior resistance to flank wear, cratering and plastic deformation. Toughness and wear resistance balance.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | UE6035 |
Insert material: | CARBIDE - CVD COATED |
ISO range: | P15-35 |
ANSI range: | C5-C6 |
Coating: | Multi-layer |
Description: | 'All new coated cemented carbide for rough and tough turning of steel, stainless steel, castings and forgings. Excellent in heavy interrupted cuts as well as continuous machining at low to moderate speeds.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | UP20M |
Insert material: | CARBIDE - PVD COATED |
ISO range: | P15-30 K10-30 |
ANSI range: | C5-C6 C1-C3 |
Coating: | TiN |
Description: | 'Conventional PVD coated cemented carbide for milling and turning of steel.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | UP35N |
Insert material: | CERMET - PVD COATED |
ISO range: | P10-20 |
ANSI range: | C6-C7 |
Coating: | TiN |
Description: | 'TiN coated cermet for steel turning operations when NX99 encounters short wear life. High efficient finishing and tool life can be expected on cutting operations of steel and stainless steel. This PVD coated cermet, capable of both wet and dry cutting can be used on interrupted cutting.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | US7020 |
Insert material: | CARBIDE - CVD COATED |
ISO range: | P15-35 M05-35 |
ANSI range: | C5-C6 |
Coating: | CVD |
Description: | 'An all new coated carbide turning grade ideal for higher speed machining of stainless steel. Able to turn stainless steel at speeds up to 800 SFPM. This grade also features a special edge prep that inhibits edge build-up in gummy materials.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | US735 |
Insert material: | CARBIDE - CVD COATED |
ISO range: | P20-40 |
ANSI range: | C5-C6 |
Coating: | Multi-layer |
Description: | 'Specially designed for both interrupted and uninterrupted machining of materials that are subject to workhardening, such as stainless steels, where a sharper cutting edge produces more desired results. Suitable for turning carbon steels also.' |
Manufacturer: | MITSUBISHI (close window) |
Grade name: | UTi20T |
Insert material: | CARBIDE - UNCOATED |
ISO range: | P20-30 |
ANSI range: | C5-C6 |
Coating: | |
Description: | 'Uncoated C5/C6 carbide grade with high edge strength. Designed for general purpose turning and milling of steel. Ideal for stainless steel, and for difficult machining conditions, such as interrupted cutting.' |