Toshiba Tungaloy EXP High Feed Indexable End Mills

Toshiba Tungaloy EXP High Feed Indexable End Mills - Recommended Speeds and Feeds

Material	Grade	SFM	in per tooth	plunging
carbon steel	AH120	300-800	.020-.080	0.008
alloy steel	AH120	300-650	.020-.080	0.008
stainless	AH120	600-900	.020-.040	0.004
cast iron	AH120	300-1000	.030-.100	0.008

Maximum depth of cut is 0.060"
Above values apply only when overhang is below 3 times cutter diameter
Use internal or external air supply to blow chips and prevent tool failure
Full engagement is recommended for best tool life
Click here for INTERACTIVE MILLING FORMULAS